1. Engine Mounts Deals
  2. sku: 22277600340960773
  3. TRQ PIECE ENGINE MOUNT SET 92ZWND

TRQ 2 PIECE ENGINE MOUNT SET 92ZWND V10

fits make: Chevy. year: 1987.

92zwnd Trq 2 Piece Engine Mount Set Fits Chevy V10 1987

( Brand: Trq 2 Piece Engine Mount Set ), ( Manufacturer Part Number: 92ZWND ), ( Part Type: Engine Mount Set ), ( Engine: 6.2l V8, 5.7l V8, 5.0l V8 ), ( Compatible Make/model: Chevrolet V10 ), ( Compatible Years: 1987 87 ), ( Fitment Info: 2 Piece Engine Mount Set ), ( Manufacturer Warranty: 12 Month Warranty ), ( Attention: Read Full Description To Confirm Fitment ), ( Cs-sku: 400 )

Review TRQ 2 PIECE ENGINE MOUNT SET Chevy V10 fits 1987

The **1987 Chevrolet V10 (92ZWND) Engine Mount Set** is a precision-engineered upgrade designed specifically for the iconic, high-performance 5.7L (345 cubic inch) V8 engine found in the Corvette ZR-1 and select high-output applications of the era. This mount set is meticulously crafted to replace the stock rubber and polyurethane mounts, offering enhanced durability, improved vibration isolation, and superior structural integrity critical components for maintaining the integrity of the engine bay in a vehicle that pushes the limits of power and handling. The mounts are constructed from high-grade, heat-resistant rubber compounds reinforced with internal steel shackles and robust mounting hardware, ensuring they can withstand the extreme forces generated by the aggressive camshaft profiles, high-revving nature, and aggressive throttle response of the LS7-based V8. Unlike generic aftermarket replacements, this set is tailored to the exact bolt patterns and mounting points of the 92ZWND application, guaranteeing a perfect fit without compromising alignment or clearance. Whether you're running a stock engine for daily driving or a heavily modified setup with forced induction or nitrous, these mounts provide a stable foundation that minimizes engine movement, reduces stress on the firewall and transmission mounts, and helps preserve the longevity of the drivetrain. Built to handle the demands of both track and street use, this engine mount set is an essential upgrade for any owner seeking to optimize performance, reliability, and comfort while preserving the legendary character of the 1987 Corvette ZR-1.

### **Pros and Cons of Buying an Engine Mount Set for a 1987 Chevy V10 (92ZWND)**

#### **Pros**

1. **Improved Engine Stability** Worn or damaged engine mounts can cause excessive vibration, rattling, and even engine movement under acceleration or hard braking. Replacing them ensures the engine stays securely in place, reducing strain on other components like the transmission and drivetrain.

2. **Reduced Noise and Vibration** A properly mounted engine runs quieter and smoother, eliminating the clunking, rattling, or thumping noises that occur when mounts degrade. This is particularly noticeable in older vehicles where mounts naturally wear out over time.

3. **Prevents Further Damage** If mounts are failing, they can lead to more serious issues, such as:

- **Transmission damage** (from excessive movement)

- **Exhaust manifold cracks** (due to stress)

- **Driveline or suspension wear** (from misalignment)

- **Coolant or oil leaks** (if mounts allow the engine to shift enough to damage hoses or connections)

Replacing them early avoids costly repairs down the line.

4. **Better Driving Comfort** A stable engine means a more comfortable ride, especially on rough roads or during high-speed cruising. Vibrations can also affect steering feel and handling.

5. **Compatibility with Modifications** If you plan to add power (turbocharging, forced induction, or engine swaps), new mounts are often recommended to handle increased stress. The **92ZWND** (a common aftermarket part for GM V8/V10 engines) is designed to support higher loads.

6. **Easy Installation** Most aftermarket engine mount sets, including the **92ZWND**, are designed for straightforward replacement. They typically come with gaskets, bolts, and sometimes mounting hardware, making the job manageable for a DIYer with basic tools.

7. **Cost-Effective Maintenance** Replacing mounts is a relatively inexpensive fix compared to the potential damage from ignoring them. A quality set (like the **92ZWND**) usually costs between **$100 $200**, depending on brand and whether it includes hardware.

8. **Durability** High-quality mounts (such as those from **Eibach, Meziere, or Bilstein**) are built to last longer than OEM parts, reducing the need for frequent replacements.

---

#### **Cons**

1. **Labor Intensity** While the parts themselves are affordable, the installation can be labor-intensive, especially if the vehicle is lifted or requires transmission removal. Accessing the mounts may require:

- Removing the subframe or engine bay components

- Disconnecting the exhaust or cooling system

- Possible transmission jacking (if the mount is integrated with the transmission)

This can take **4 8 hours** for a skilled mechanic or **DIYer with patience**.

2. **Potential for Misalignment** If not installed correctly, new mounts can cause:

- **Transmission or drivetrain binding** (if not properly torqued)

- **Exhaust or intake misalignment** (leading to leaks or performance issues)

- **Suspension interference** (if mounts are too long or short)

Ensuring proper alignment is critical, which may require additional adjustments.

3. **Compatibility Issues** While the **92ZWND** is a popular choice for GM V8/V10 applications (including the **92ZWND itself**), not all mounts fit every engine bay perfectly. Some vehicles may require:

- **Custom spacers or adapters**

- **Modifications to the firewall or subframe**

- **Different mount styles** (e.g., rubber vs. polyurethane)

Always verify fitment before purchasing.

4. **Hardware Requirements** Some mount sets may not include all necessary bolts, gaskets, or mounting hardware. You may need to source:

- **Torx or specialty bolts** (common in modern GM applications)

- **Sealing kits** (for rubber mounts)

- **Additional brackets** (if the mount integrates with the transmission)

This adds to the cost if you re unprepared.

5. **Polyurethane Mounts May Be Noisier** While polyurethane mounts offer better durability and vibration damping than rubber, they can sometimes transmit more road noise into the cabin. This is more noticeable in **off-road or high-performance builds** where stiffer mounts are preferred.

6. **Potential for Over-Tightening** If mounts are torqued too tightly, they can:

- **Crack or fail prematurely**

- **Strain the engine or transmission mounts**

- **Cause misalignment issues**

Following the manufacturer s torque specs is essential.

7. **Limited Lifespan (If Cheap Parts Are Used)** While the **92ZWND** is a reputable brand, cheaper aftermarket mounts may wear out faster, especially in aggressive driving conditions. Investing in a mid-to-high-end set (e.g., **Eibach, Meziere, or Bilstein**) ensures better longevity.

---

### **Ending Conclusion**

Replacing engine mounts on a **1987 Chevy V10 (92ZWND application)** is a **highly recommended maintenance task** if the mounts are worn, leaking, or causing excessive vibration. The benefits **improved stability, reduced noise, prevention of further damage, and better driving comfort** far outweigh the drawbacks, which are mostly related to **installation complexity and potential misalignment risks**.

The **92ZWND engine mount set** is a **solid choice** for GM V8/V10 applications, offering durability and compatibility with aftermarket modifications. However, **proper installation is critical**, and if you re unsure, consulting a mechanic or following a detailed guide is advisable.

### **Final Recommendation**

- **If your mounts are failing or showing signs of wear (cracks, leaks, excessive movement), replace them immediately.**

- **Choose a reputable brand** like **92ZWND, Eibach, or Meziere** for reliability.

- **Budget for labor** if DIYing, allocate **4 8 hours** for installation.

- **Verify fitment** ensure the mounts match your specific engine bay configuration.

- **Torque bolts properly** follow the manufacturer s specs to avoid misalignment.

- **Consider polyurethane mounts** if you plan aggressive driving or modifications, as they offer better durability.

**Bottom Line:** A well-executed engine mount replacement will **extend the life of your engine, improve drivability, and prevent costly repairs**, making it a **worthwhile investment** for any **1987 Chevy V10 owner**.

Details:

TRQ 2 Piece Engine Mount Set fits Chevy V10 1987 92ZWND: Brand: condition: New Notes: Set, Features:Highest Quality Materials. Detailed Applications Years: Vehicle: Engine: 1987 Chevrolet V106.2L V8, V105.7L V105.0L V8. Product Specifications Quantity: 2 Piece. Direct Fit Replacement - Guaranteed to fit and function for your specific application.

Package Contents: 2 Engine Mounts. Quality Tested - built to a strict level of product standards.

part #: 92zwnd price

  • $59.94

specifications engimou:

  • for makes: Chevy
  • brand: Trq 2 Piece Engine Mount Set
  • mpn: 92zwnd
  • part type: Engine Mount Set
  • engine: 6.2l V8, 5.7l V8, 5.0l V8
  • compatible make/model: Chevrolet V10
  • compatible years: 1987 87
  • fitment info: 2 Piece Engine Mount Set
  • manufacturer warranty: 12 Month Warranty
  • attention: Read Full Description To Confirm Fitment
  • cs-sku: 400

seller engimou:

  • # reviews: 23497
  • rating: 99.1%
  • city: New Bedford, MassachuSetts

returns engimou:

  • time: 30 Days
  • policy: Returns Accepted
  • paid by: Seller

offer engimou:

  • quantity: 1
  • availability: In Stock
  • sold: 0
  • options: Ship-to-home
  • started: March 28, 2026

payments engimou:

  • credit card: Diners-club
  • wallet: Apple-pay
  • other

general engimou:

  • Car Truck Parts Accessories > Engines Engine Parts > Engine Mounts
  • condition: New

shipping engimou:

  • service: Economy
  • transit: 4-7 Days
  • type: Fixed
  • cost: $0.00
  • class: Economy
for makes: chevy, part type: engine mount set, engine: 6.2l v8, 5.7l v8, 5.0l v8, compatible make/model: chevrolet v10, compatible years: 1987 87, fitment info: 2 piece engine mount set, manufacturer warranty: 12 month warranty, attention: read full description to confirm fitment, cs-sku: 400,
category: auto parts > car truck parts accessories > engines engine parts > engine mounts, sku: 22277600340960773,
Trq 2 Piece Engine Mount Set 92ZWND Is Similar To:
engimou logo
1 offer $59.94 USD
  • New. Offer #1 priced at $59.94 + $0.00 shipping estimate = $59.94* total. Condition: New. 1987 Chevrolet V10 6.2L V8.FREE SHIPPING

Copyright © engimou.com