BFO IP47YZ Swap Adapter Plates Solid Motor Mounts 4.6

( Brand: Bfo ), ( Manufacturer Part Number: IP47YZ ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Items Included: Bracket, Engine Mount, Mounting Hardware ), ( Manufacturer Warranty: 2 Year ), ( Material: Steel ), ( Note: The Colour Of This Product Is Actually Golden ), ( Notice: This Is Aftermarket Replcement Part ), ( Oe/oem Part Number: 3013-102 ), ( Placement On Vehicle: Front, Left, Right ), ( Type: Engine Mount Adapter Plates )

Review BFO Swap Adapter Plates 4.6 Solid Motor Mounts Ford fits MUSTANG LS1 LS2 LS3 LS6

The **BFO IP47YZ Swap Adapter Plates for 4.6L Solid Motor Mounts** are a meticulously engineered solution designed to seamlessly integrate a Ford 4.6L V8 engine whether it be an LS1, LS2, LS3, or LS6 variant into a Mustang chassis originally built for the older 4.6L or 5.0L pushrod engines. These high-quality adapter plates are crafted from heavy-duty, precision-machined steel, ensuring unmatched durability and structural integrity under the demanding stresses of high-performance driving. Engineered to fit snugly between the LS engine s stock motor mounts and the Mustang s firewall and transmission tunnel, these plates eliminate the need for costly modifications to the vehicle s frame or suspension, making them an ideal choice for swap builders seeking a clean, factory-inspired installation. The IP47YZ model is specifically tailored to accommodate the LS engine s unique mounting pattern while maintaining proper alignment with the Mustang s stock transmission tunnel and firewall, reducing the risk of misalignment or binding during operation. Whether you're restoring a classic Mustang or building a modern LS-powered muscle car, these adapter plates provide a robust foundation for a smooth, reliable swap, allowing you to focus on fine-tuning performance without compromising on fitment or safety. Built to withstand the rigors of daily driving and spirited acceleration, these plates are a testament to BFO s commitment to precision engineering and aftermarket excellence.

The **BFO IP47YZ Swap Adapter Plates for 4.6 Solid Motor Mounts** are designed to facilitate the installation of a Ford 4.6L engine (such as the LS1, LS2, LS3, or LS6) into a Mustang chassis by bridging the gap between the stock 4.6L mounts and the LS engine s mounting pattern. Below is a detailed breakdown of their pros and cons, followed by a conclusion and recommendation.

---

### **Pros**

1. **Compatibility with LS Engines**

The adapter plates are specifically engineered to fit LS-series engines (LS1, LS2, LS3, LS6) while interfacing with the Mustang s stock 4.6L motor mounts. This allows for a direct swap without extensive chassis modifications, making it a practical solution for enthusiasts who want an LS engine in their Mustang.

2. **Reduces Chassis Modifications**

Without these plates, swapping an LS engine into a Mustang would require cutting or modifying the stock 4.6L mounts, which can weaken the chassis or require additional welding and reinforcement. The adapter plates eliminate this need, preserving the integrity of the Mustang s frame.

3. **Improved Engine Support**

LS engines are heavier than the 4.6L, and the adapter plates are designed to distribute the load more evenly across the Mustang s suspension and chassis points. This can reduce stress on the frame rails and subframe, though proper installation and additional support (like a subframe connector) are still recommended.

4. **Simplifies Installation**

The plates are pre-machined to match both the LS engine s bolt pattern and the Mustang s stock mount locations. This reduces the complexity of the swap process, especially for those without extensive mechanical experience. Instructions and alignment guides are typically provided to ensure proper fitment.

5. **Retains Stock Mounting Points**

By using the stock 4.6L mount locations, the adapter plates allow for easier integration with existing Mustang suspension components (like control arms and sway bars) without requiring new mounts or extensive rework.

6. **Cost-Effective Solution**

Compared to a full custom mount setup or extensive chassis modifications, the adapter plates are relatively affordable. They are a middle-ground option for those who want an LS engine but don t want to invest in a full custom build.

7. **Backward Compatibility**

The plates are designed to work with the Mustang s stock subframe and suspension, meaning you can retain other stock components (like the stock subframe or even some aftermarket parts) without major conflicts.

---

### **Cons**

1. **Potential for Misalignment**

LS engines have a different bolt pattern and mounting geometry than the 4.6L, and while the adapter plates are designed to bridge this gap, improper installation can lead to misalignment. This may cause issues with the engine s position relative to the transmission, exhaust, or drivetrain components. Ensuring precise alignment during installation is critical.

2. **Limited to Specific LS Engines**

The plates are tailored for LS-series engines, but not all LS variants (e.g., LS7, LS9, or older Gen III engines) may fit perfectly without additional modifications. The LS1/LS2/LS3/LS6 are the most common and compatible, but users should verify compatibility with their specific engine model.

3. **May Require Additional Support**

While the adapter plates help distribute weight, an LS engine is still significantly heavier than the 4.6L. In some cases, additional reinforcement (such as a subframe connector or reinforced motor mounts) may be necessary to prevent excessive stress on the chassis, especially in high-performance applications.

4. **Potential for Vibration or Noise**

If the plates are not installed correctly or if the engine is not properly balanced, vibrations or unusual noises (such as clunking or rattling) may occur. This is more likely if the engine is not perfectly aligned or if the Mustang s suspension is not properly tuned for the added weight.

5. **Limited to Stock or Minimal Modifications**

The adapter plates are designed for a stock-like installation. If you plan to make significant modifications (such as lowering the suspension, changing the drivetrain, or adding performance parts), the plates may not account for these changes, leading to potential fitment issues.

6. **Quality and Fitment Variability**

Aftermarket parts can vary in quality, and some users have reported issues with misalignment or poor fitment if the plates are not installed carefully. It s important to follow the manufacturer s instructions precisely and, if possible, consult with a professional mechanic familiar with LS swaps.

7. **No Guarantee of Long-Term Reliability**

While the adapter plates are designed to be durable, their long-term reliability depends on proper installation and maintenance. Over time, wear or fatigue could occur, especially if the engine is subjected to high stress (e.g., aggressive driving, heavy loads, or performance modifications).

---

### **Conclusion**

The **BFO IP47YZ Swap Adapter Plates** are a practical and cost-effective solution for swapping an LS engine (LS1, LS2, LS3, or LS6) into a Mustang while retaining the stock 4.6L motor mounts. They simplify the installation process, reduce the need for extensive chassis modifications, and provide a solid foundation for the LS engine. However, they are not without limitations. Misalignment, potential vibration issues, and the need for additional support (such as a subframe connector) are real considerations that must be addressed during installation.

For most enthusiasts looking to perform a straightforward LS swap without major chassis modifications, these plates are a viable option. However, those planning extensive modifications (such as lowering the suspension, adding a custom drivetrain, or pursuing high-performance applications) may need to supplement the plates with additional parts or reinforcements.

---

### **Recommendation**

If you are planning an **LS engine swap into a Mustang** and want to avoid cutting or modifying the stock 4.6L mounts, the **BFO IP47YZ Swap Adapter Plates** are a solid choice. Here s how to maximize their effectiveness:

1. **Verify Compatibility**

Ensure your specific LS engine (LS1, LS2, LS3, or LS6) is compatible with the plates. Double-check the bolt pattern and mounting points to avoid surprises during installation.

2. **Follow Installation Instructions Carefully**

Precision is key. Use the provided alignment guides and torque specifications to ensure the plates are installed correctly. Consider consulting a mechanic or LS swap specialist if you re unsure about any step.

3. **Supplement with Additional Support**

Even with the adapter plates, an LS engine is heavier. Install a **subframe connector** (such as the BFO or Ford Performance subframe connector) to reinforce the chassis and reduce stress on the frame rails. This is especially important if you plan to drive aggressively or modify the suspension.

4. **Check for Misalignment**

After installation, verify that the engine is properly aligned with the transmission, exhaust, and drivetrain components. Any misalignment could lead to drivetrain issues or excessive vibration.

5. **Consider a Full Suspension Setup**

If you plan to lower the Mustang or modify the suspension, ensure the plates are compatible with your new suspension components. Some aftermarket suspension parts may require additional adjustments.

6. **Budget for Additional Parts**

While the plates are affordable, factor in the cost of a subframe connector, alignment tools, and any other necessary components (such as new gaskets, bolts, or brackets) to ensure a complete and reliable installation.

7. **Test Drive and Monitor**

After installation, take the Mustang for a test drive to listen for unusual noises or vibrations. Address any issues promptly to prevent long-term damage.

---

**Final Verdict:** The **BFO IP47YZ Swap Adapter Plates** are a practical and recommended option for Mustang owners looking to swap an LS engine while minimizing chassis modifications. With careful installation and the addition of necessary support components, they can provide a solid foundation for a successful LS swap. However, those seeking a fully custom or heavily modified setup may need to explore additional solutions beyond just the adapter plates.

Details:

Make your LS engine swap easier with this Motor Mount Adapter Swap plates and Solid 4.6 kit for vehicle. Guaranteed Fitment Always the correct part. Best Costumer Service. 1/4 Thick Mild Steel.

Precision Laser Cut. No cutting or drilling required. All messages. Easy Installation.

For Ford Mustang W/4.8L, 5.3L, 6.0L, LS1, LS2, LS3, LS6, LS7, LS9, LSX G-M Blocks. Factory Warranty. Suspension Masters US. For Ford Mustang 1979-2004.

Package Include.

specifications engimou:

• for models: Ls1, Ls2, Ls3, Ls6, Mustang
• for makes: Ford
• brand: Bfo
• mpn: Ip47yz
• california prop 65 warning: California Prop 65 Warning
• items included: Bracket, Engine Mount, Mounting Hardware
• manufacturer warranty: 2 Year
• material: Steel
• note: The Colour Of This Product Is Actually Golden
• notice: This Is Aftermarket Replcement Part
• oe/oem part number: 3013-102
• placement on vehicle: Front, Left, Right
• type: Engine Mount Adapter Plates

offer engimou:

• best offers: True
• availability: In Stock
• started: February 4, 2026
• options: Ship-to-home
• sold: 0

seller engimou:

• # reviews: 12741
• rating: 99.4%
• city: Rowland height, California

payments engimou:

• credit card: Visa
• other
• wallet: Google-pay

shipping engimou:

• service: FedEx Ground / FedEx Home Delivery
• type: Fixed
• carrier: FedEx
• class: Standard
• transit: 3-7 Days
• cost: $0.00

general engimou:

• Car Truck Parts Accessories > Engines Engine Parts > Engine Mounts
• condition: New

returns engimou:

• time: 30 Days
• paid by: Seller
• policy: Returns Accepted

Bfo IP47YZ Is Similar To:

• Umpg4b Bfo Engine Swap Conversion Adapter Plate Mount For Chevy Ls (47.1% similar) Engine mount adapter plates swap kit for Chevrolet C10 lax LS1 LS2 LQ9 1973 -1987. Applications: for Chevrolet C10 lax LS1 LS2 LS3 LQ4 LQ9 4.8 5.3 6.0 6.2 1973 -1987. Catalytic converter 54807 for Chevy cobalt 2005 -2007 for Chevy HRH 2.2L 2006 -200. The Bfo UMPG4B is in new condition...(January 7th, 2022)
• Dliuxo Bfo Engine Motor And Auto Trans Mount Set For (29.4% similar) A6595, A6591, A4511, A6588. 8988 / A6595: front motor mount. For Honda civic 1.7L 2001 -2005 for auto trans. For aura el 1.7L 2001 -2005 for auto trans. This mount set includes 3 motor mounts 1 trans. The Bfo deluxe is in new condition...(January 9th, 2022)
• Oukp86 Bfo Pair Engine Motor Mounts Fits For Ford Cleveland (44% similar) For ford Windsor Cleveland 302 351 v8 engine motor mount. 8PCS ignition coil for Chevy Silverado Tahoe suburban sierra v8 truck D581 UF271. Performance engine connecting rod for ford flow lotus twin cam bad 5.23 132.84MM. The Bfo OUKP86 is in new condition...(January 10th, 2022)
• 7jktxf Bfo Engine Motor And Auto Trans Mount Fits For Acura (33.3% similar) Note: except 2007 for aura Tl 3.2L auto engine 2008 for aura Tl base model. Applications: for aura Tl 3.2L / 3.5L 2007 - 2008 for automatic transmission. This mount set includes 2 motor mounts, 2 transmission suspension mounts 1 trans. The Bfo 7JKTXF is in new condition...(January 13th, 2022)
• Nwk7l6 Bfo Engine Motor Mount And Trans Set Of For Kia (33.1% similar) A71022/A6780, A7176, A7177, A6777. A7177 / EM-9323: rear motor mount. 2007 -2010 for KIA optima 2.4L. This mount set includes 3 motor mounts 1 trans. 2007 -2010 for KIA magnetise 2.4L. Outlet manifold catalytic converter for Hyundai sonata for KIA optima 2.4L 09-15. The Bfo NWK7L6 is in new ...(January 14th, 2022)
• S1kgeb Bfo Engine Motor Mount And Transmission Set For Ford Focus (38.5% similar) This mount set has 1 motor mounts 1 trans. Mount 1 torque strut mount A2986 / 2986 - transmission mount. A3003 / 3003 - front right motor mount. A2939 / 2939 - rear torque strut mount. The Bfo Serb is in new condition...(January 16th, 2022)
• S4ix8m Bfo Engine Motor And Trans Mount For Mitsubishi Lancer Auto (34.4% similar) Applications: 2002 -2007 for Mitsubishi lancer 2.0L for automatic transmission. This mount set includes 3 motor mounts 1 trans. A6647 / EM-9181: front motor mount. A4606 / EM-9188: front right motor mount. The Bfo S4IX8M is in new condition...(January 17th, 2022)
• N1da4m Bfo Engine Motor Mount And Trans For Acura Tlx Auto (36.2% similar) Applications: 2015 -2019 for aura TLC 2.4L for auto transmission. This mount set includes 3 motor mounts 1 trans. A65072: motor mount - front. A65054: motor mount - front right. A65040: motor mount - rear. New condition...(January 18th, 2022)
• Qdvow4 Bfo Engine Motor And Auto Transmission Mount For Ford Focus (36.9% similar) 2008 2011 for ford focus 2.0L l4 for auto trans. This mount set has 1 motor mounts, 1 torque strut mount 1 trans. A5495 / 5495: front right motor mount. A2986 / 2986: upper transmission mount. A5322 / 3087: lower torque strut mount. New condition...(January 18th, 2022)
• V3bozk Bfo Motor And Transmission Mount For Toyota Corolla Auto Trans (33.8% similar) For Toyota corolla 1.8L 2003 -2008 automatic trans. This mount set includes 3 motor mounts 1 trans. A4219 / 4219 / MK4219: motor mount - front. A4221 / 4221 / MK4221: motor mount - front right. A4218 / 4218 / MK4218: transmission mount. New condition...(January 19th, 2022)
• 6fk7ls Bfo Engine Motor Mount And Transmission Set For Subaru Legacy (34% similar) 4PCS engine trans motor mount pitch mount for Subaru impress Rx sit forester XLT. For Subaru legacy 2005 -2011. Fit for EJ20/EJ25 engines only with manual transmission; all 2006 model's require 2002 - 2005 for Subaru Rx mount plates to properly install. New condition...(January 21st, 2022)