1. Engine Mounts Deals
  2. sku: 22436802782780773
  3. CHRYSLER SPN01-8085

CHRYSLER SPN01-8085 Shaft Pulley Balancer PW0BZ

fits model: Sebring. make: Chrysler. year: 2008.

Spn01-8085 Chrysler 2008 Sebring Shaft Pulley Balancer Pw0bz

( Manufacturer Part Number: SPN01-8085 ), ( Part Type: Shaft Balancer ), ( Features: Shaft Pulley Balancer ), ( Fitment Type: Direct Replacement ), ( Modified Item: No ), ( Manufacturer Warranty: Unspecified Length )

Review CHRYSLER Shaft Pulley Balancer fits SEBRING 2008

The **Chrysler SPN01-8085 2008 Sebring Shaft Pulley Balancer (PW0BZ)** is a precision-engineered accessory designed specifically for the 2008 Chrysler Sebring, ensuring optimal performance and longevity for the vehicle s powertrain. This high-quality shaft pulley balancer is crafted to replace the original equipment manufacturer (OEM) component, maintaining the factory s exact specifications to guarantee seamless integration with the engine s auxiliary systems. The pulley is constructed from durable, high-grade steel, engineered to withstand the rigors of continuous operation under varying loads, temperatures, and vibrations, which are common in daily driving conditions. Its robust construction minimizes wear and tear on the serpentine belt system, reducing the risk of premature failure and costly repairs associated with belt slippage or tension inconsistencies. The balancer features a smooth, precision-machined surface that ensures even belt tension across all pulleys, promoting efficient power transfer and reducing unnecessary strain on the alternator, power steering pump, and air conditioning compressor. This component is particularly critical for maintaining the proper phasing of the engine s auxiliary drives, which directly impacts fuel efficiency, engine smoothness, and overall drivability. Whether installed during routine maintenance or as part of a belt replacement service, the SPN01-8085 balancer provides a reliable, long-lasting solution that adheres to Chrysler s stringent engineering standards. Its compatibility with the PW0BZ powertrain commonly found in the 2.4L or 3.0L engines of the 2008 Sebring ensures that it fits perfectly without modifications, offering drivers peace of mind with a component that performs just as well as the original. By investing in this aftermarket balancer, vehicle owners can extend the lifespan of their engine s auxiliary components while enjoying improved performance and reduced maintenance headaches.

### **Pros and Cons of Buying a Chrysler SPN01-8085 (2008 Sebring Shaft Pulley/Balancer PW0BZ)**

#### **Pros:**

The **Chrysler SPN01-8085** is a **shaft pulley/balancer assembly** for the **2008 Chrysler Sebring (3.8L V6)**. This part is critical for engine balance, vibration reduction, and proper accessory drive system function. Here are the key advantages of purchasing this component:

1. **Direct Fitment** Designed specifically for the **2008 Sebring with the PW0BZ engine**, ensuring compatibility without modifications.

2. **Improved Engine Balance** A worn or damaged pulley/balancer can cause excessive vibration, which this replacement helps eliminate, reducing stress on the engine mounts and drivetrain.

3. **Prevents Accessory Drive Issues** The pulley engages with the serpentine belt system; a new one ensures smooth operation of the alternator, power steering pump, and A/C compressor.

4. **OEM Quality (if genuine)** Chrysler s original parts are built to meet factory specifications, offering durability and reliability.

5. **Aftermarket Options Available** Some aftermarket brands offer competitive pricing while maintaining quality, making it a cost-effective alternative to OEM.

6. **Preventative Maintenance** Replacing this part as part of routine maintenance can extend the lifespan of related components (e.g., belt tensioners, mounts).

7. **Easy Installation** Designed for straightforward replacement, though some mechanical skill is recommended for proper alignment and torque settings.

---

#### **Cons:** While this part is essential, there are potential drawbacks to consider before purchasing:

1. **Cost** Replacement parts can be **expensive**, especially if opting for an **OEM or high-quality aftermarket** version. Prices typically range from **$150 $300 **, depending on brand and availability.

2. **Labor Intensive Installation** Removing the old pulley/balancer requires **disconnecting the serpentine belt, removing the engine cover, and possibly adjusting timing components** (if applicable). This may require professional installation, adding to labor costs.

3. **Potential for Counterfeit Parts** Some aftermarket suppliers sell **fake or low-quality replicas**, which may fail prematurely or cause further damage. Buying from **reputable dealers** (e.g., RockAuto, eBay Motors, or local auto parts stores) reduces this risk.

4. **Wear on Related Components** If the pulley was damaged due to **excessive belt tension, misalignment, or a failing tensioner**, other parts (e.g., **belt tensioner, mounts, or even the crankshaft pulley**) may also need replacement.

5. **Limited Lifespan** While durable, **pulley/balancer assemblies are not lifetime components** and may wear out over **50,000 100,000 miles**, depending on driving conditions.

6. **Possible Timing Chain/Guide Issues** On some **3.8L V6 engines**, a pulley replacement may require **timing chain inspection or adjustment**, adding complexity if not properly addressed.

7. **Availability of Used/Rebuilt Units** While possible, **used or rebuilt pulley/balancer assemblies** may not be as reliable as new ones and could introduce hidden damage.

---

### **Conclusion:**

The **Chrysler SPN01-8085 shaft pulley/balancer** is a **necessary component for maintaining engine smoothness and preventing drivetrain issues** in a **2008 Sebring (PW0BZ)**. The decision to replace it should be based on **symptoms of vibration, belt slippage, or unusual engine noise**, rather than purely as a preventive measure (unless part of a major overhaul).

If your vehicle exhibits **excessive vibration, belt squealing, or a wobbling pulley**, replacing this part is **highly recommended** to avoid further damage. However, if the pulley is **functioning properly**, replacement may not be urgent unless part of a **larger engine service**.

---

### **Recommendation:**

1. **Verify the Need** Before purchasing, **inspect the pulley for cracks, excessive wear, or imbalance**. If it appears damaged, proceed with replacement.

2. **Choose Quality Over Cheap Alternatives** Opt for **OEM or a well-reviewed aftermarket brand** (e.g., **Dorman, Gates, or ACDelco**) to ensure longevity.

3. **Consider Professional Installation** If unfamiliar with engine work, **have a trusted mechanic install it** to avoid misalignment or improper torque, which could lead to **belt failure or engine damage**.

4. **Check for Related Issues** While replacing the pulley, **inspect the serpentine belt, tensioner, and mounts** for wear. Replace any worn components to prevent future problems.

5. **Budget for Labor** If DIY installation is attempted, **allocate time and tools** (e.g., torque wrench, belt tension tool). If not confident, **factor in shop labor costs ( $100 $200)**.

6. **Purchase from a Reputable Source** Buy from **authorized dealers, RockAuto, or trusted online marketplaces** to avoid counterfeit parts.

**Final Verdict:**

If your **2008 Sebring s pulley/balancer is failing**, replacing it with the **SPN01-8085** is a **wise investment** to restore engine balance and prevent costly damage. However, if the part is **still in good condition**, replacement may not be immediately necessary unless part of a **larger engine service plan**. Always **prioritize quality and proper installation** to maximize reliability.

Details:

Shipping is via USPS or UPS. Please also use the pictures to ensure a proper fit. Compatible with. Most electronic parts are not plug and play.

This 2008 CHRYSLER SEBRING REPLACE TITTLE is in overall good condition.

part #: spn018085 price

  • $60.63

specifications engimou:

  • for models: Sebring
  • for makes: Chrysler
  • for years: 2008
  • mpn: Spn01-8085
  • part type: Shaft Balancer
  • features: Shaft Pulley Balancer
  • fitment type: Direct Replacement
  • modified item: No
  • manufacturer warranty: Unspecified Length

seller engimou:

  • city: Las Vegas, Nevada
  • rating: 99.3%
  • # reviews: 82561

payments engimou:

  • other
  • credit card: Discover
  • wallet: Apple-pay

general engimou:

  • condition: Used
  • Car Truck Parts Accessories > Engines Engine Parts > Engine Mounts

returns engimou:

  • policy: Returns Accepted
  • paid by: Seller
  • time: 30 Days

offer engimou:

  • started: April 4, 2026
  • sold: 0
  • options: Ship-to-home
  • quantity: 1
  • availability: In Stock

shipping engimou:

  • class: Standard, Expedited
  • service: Standard, Expedited
  • cost: $0.00
  • transit: 3-6 Days
  • type: Fixed
for models: sebring, for makes: chrysler, for years: 2008, part type: shaft balancer, features: shaft pulley balancer, fitment type: direct replacement, modified item: no, manufacturer warranty: unspecified length,
category: auto parts > car truck parts accessories > engines engine parts > engine mounts, sku: 22436802782780773,
Chrysler SPN01-8085 Is Similar To:
engimou logo
1 offer $60.63 USD
  • Used. Offer #1 priced at $60.63 + $0.00 shipping estimate = $60.63* total. Most electronic parts are not plug and play. This 2008 CHRYSLER SEBRING REPLACE TITTLE is in overall good condition.FREE SHIPPING

Copyright © engimou.com